7 Mistakes to Avoid When Buying a Water Plant

One should take adequate measures to ensure drinking water is safe from all contaminants and impurities. Pollutants in the water pose a significant threat to the health of individuals. Certain pollutants are so toxic and heavy that inky big treatment plants can remove them from water. Therefore, having a functional and adequate 100 LPH RO plant will clean the water and make it safe for drinking.

Why A Water Plant?

The reverse osmosis process in water plants uses pressure to reverse water flow. The membrane filters bacteria, chemicals, particles, carbon, and other contaminants in places where the contaminant content in the water is very high. 

It has, for instance, excess minerals, and the water is unfit for consumption. The membrane in the filter sieves out all the heavy pesticides or other arsenic particles. Certain substances are present in water that is only removable through reverse osmosis.

Mistake 1: Not Checking the Technical Requirements

You cannot use any kind of water treatment at any place. Take the help of a technical expert from the water purifier service in Lucknow. See if the plant will work all right at your home and system. Water treatment plants are expensive, and one cannot risk buying them only to find out they are incompatible with their place. 

Mistake 2: Not Getting a Feed Water Analysis Pre-Design

Feed analysis is a fundamental process and part of a water treatment plant. However, some water treatment plants get based solely on the flow rate. They ignore the feed water capacity. 

A significant cause for this may be the availability of plug-and-play systems. They are often said to be turnkey solutions. These systems take into account only one set of standard water analyses. These solutions may be necessary; one cannot ignore the raw water quality. One has to ensure that the regular water system is suitable for treating the water system.

Mistake 3: Not Considering the Outlet Quality Requirement

One must get the feed water analysis before the design results. Otherwise, they will end up with an incorrectly designed water plant. If they ignore the target quality of the outlet then also, the water treatment plant will have a wrong design. 

It means that even if the plant works alright, the water will not get adequately purified. That does not solve or meet the overall purpose. 

Mistake 4: Not Finding the Cost of the Plant

To get a wastewater management plant, you must check the cost of the unit. A high-quality product will be on the costlier side. However, they will provide superior water treatment. The water plants will also last for years with proper servicing and maintenance. 

Mistake 5: Secondary Waste Management

During water treatment, plant workers can make workers’ biggest mistake in not treating the secondary waste. Secondary waste refers to waste produced during the water treatment process. 

The toxic contaminants in the water cause the volume to increase. It is not safe for consumption and can cause a host of diseases. Secondary wastes need to get treated and then discharged. But sometimes, they get discharged without any treatment. They get released in public spaces. It is dangerous. They must get treated at a proper facility that meets all the requirements.

The secondary water treatment plant must have adequate sludge handling equipment. It should also have an effluent discharge of the plant water to the local government.  

Mistake 6: Avoiding Timely Maintenance

Poor maintenance can cause severe damage and make one bear high costs. It will seriously damage the water plant. It is why it is essential to have timely maintenance and check-ins of the water plant. 

Preventative maintenance of the water plant ensures the schedule of the change of the pre-filtration cartridges. That prolongs the life of the membrane in the systems. It does not let the membranes get any scaling and fouling. 

People can save money as the downtime of the units gets reduced. It happens as leaks can get located and hence repaired a lot faster. One can predict the flow and pressure of fresh and clean water. It enables them to get good results and keep maintained records in detail. The units will also stay in good condition for long periods.  


Some shared water problems can get solved if the water treatment facilities have proper maintenance. If the units are correctly installed and get timely servicing, they will continue to be in excellent condition for years.

Leave a Reply

Your email address will not be published. Required fields are marked *